* Reduced maintenance and power
consumption.
* No foundation bolts required for installation.
* Installation possible even upstairs with Shock Absorbers
(special level mounts) Underneath.
* Less expensive foundation.
* Easy to equip and remove, Quiet & without vibration in operation
* Range from 6"x13" lab mill to 26"x84" UNI DRIVE Mills.
Panel 6" x 13"
Lab Mixing Mill
Panel 10" x 24"
Mixing Mill
Panel 16" x 42"
Mixing Mill
Panel 10" x 24"
Mixing Mill
Features
*
Back roller is directly connected with reduction
gear box by Oldham's coupling and power is transmitted to
the front roller through connecting (couple) gears,
there by omitting ordinary large bull gear, pinion gear and
Opinion stand. this results in lower
maintenance and quieter operation as well as better transmission
efficiency ( Reduced power
consumption).
* The rear roll and front roll are inter
changeable to reduce roll inventory.
* To reduce the vibration in the main
body, reduction gear and motor are mounted on
the common
bed which is supported by wedge shaped special level mounts.
* The set position and size of level
mounts are such that the wt. is evenly
distributed on each level
mount at an average of 5 kg/cm2
* The level mounts requiring no foundation
bolts consist of three pieces of wedge with
distinctive
shock absorbers and are freely adjusted up to 12mm in height by a
spanner. This facilitates
erection, alignment and levelling and also movement of mill
from one location to the other.
* This mill is comfortable to work on for
an average height person.
