Inner Tube Splicer Machine, Dutyl Inner Tube Splicer, Inner Tube Machine, Pressure Roll Assembly, India Inner Tube Splicer Machine, Dutyl Inner Tube Splicer, Inner Tube Machine, Pressure Roll Assembly, India
 
  Inner Tube Splicer Machine, Dutyl Inner Tube Splicer, Inner Tube Machine, Pressure Roll Assembly, India
  Inner Tube Splicer Machine

INNER TUBE SPLICER MACHINE

 
Butyl Inner Tube Splicer
Butyl Inner Tube Splicer
Model SEC 50080
 

    FEATURES
 1) Man Machine Interface with 10 different programme storage 
    capacities for different sizes of tube reducing the product change-
    over  time to virtually zero.
2) Auto Diagnostic fault detector screen with hooter arrangement
    reducing the machine down time.
3) Digital heat and speed controls and indication through PLC by Man
    Machine Interface in auto mode (and pot in manual mode for
    initial setting only).
4) Three speed knives control (creep / slow / fast) with synchronized 
    three heats (medium / high / low)
5) The knives entry and exit speed heat can be controlled from 0 to
    9.99 sec with heat and speed change-over adjustable within
    1/100th of a second.
6) Man Machine Interface with display and print out.

7) 24 hrs history for:
   a) Break up of production with cycle change-over
   b) Faulty/Diagnostic messages for: knife- drop/raise/forward/reverse, power pack oil temp high,
       pump on/off etc, butting -in/out, knife temp high/low than set value.
8) The hydraulic power pack is developed & assembled indigenously with imported pump, solenoid
    valve & proportional control valves of parker make( or equivalent to customer need
    can be provided).
9) The electronic and PCL system with Man Machine Interface is only of Allyn Bradely USA with
    service back up anywhere in India by Allyn Bradely USA or its franchise (or equivalent make to
    customer need can be provided).
    There is compatibility of spares holding through the SPECIFIC's splicer range. All Splicing  
    Machines can be tailor made to a specific user requirement. The standard SPECIFIC's range of
    Inner tube Splicing Machines joins butyl, natural rubber or natural rubber and SBR blends from
    bicycle to heavy off-the -road tubes.
    The machine for the production of heat curing bags can be made to order.
    The machines have been designed to be simple and can be operated by unskilled labor.
 
TECHNICAL DATA SEC 20020 SEC 50080 SEC 750400
MAX/MIN TUBE FLAT WIDTH 200/20 MM 500/80 MM 750/400 MM
STD/SPC DOUBLE THICKNESS 20/28 MM 20/28 MM 20/28 MM
MIN STD/SPC UNSPLICED TUBE LT 800/650 MM 800/650 MM 1200/650 MM
ELECTRICAL SUPPLY  6.5 KW AT 220/380/440 3 PHASE, 50/60 HZ
(VOLTAGE & FREQUENCY TO SUIT CUSTOMER REQUIREMENTS)
MACHINE WDT/DPT/HT 1.6/1.6/1.9 M 1.6/1.6/1.9 M 2.1/1.7/2.3 M
NET WT 2500 KGS 2500 KGS 5000 KGS
TUBE PER CYCLE AUTO/BICYCLE 2/4 1 1
APPROX MACHINE CYCLE TIME 25-40 SECS 25-40 SECS 30-35 SECS

  BACK       NEXT    

| Mixing Mills | Inner Tube Machines | Bladder Curing Press | Tyre Building Machines |
| Hot Feed Extruder | Bag O Matic Tyre Curing Machines | Steel Industries | Other Industries |
 

 
 
 



















































 
  BEST VIEW : 1024 X 768 Pixels Designed & Hosted by :MID   Promoted by : GID